Lynx Audio Cable User Manual download pdf (Page 2)

INSTALLATION INSTRUCTIONS

STEP 1: Install the L22 in your computer

1. Turn OFF the power to your computer system and disconnect the power cords.

2. Touch a metal plate on your computer system to ground yourself and discharge any static electricity.

3. Remove the cover from your computer chassis and select an empty PCI slot in your computer.

4. Insert the L22 into the selected PCI slot and press it down so that the contacts are securely seated.

5. Secure the bracket of the L22 card to the computer chassis using a chassis screw or retaining bracket.

6. Replace the computer chassis cover and reconnect the power cord.

Multi-Card Systems: If you are installing more than one L22 and synchronization between cards is required, connect the

Lynx CBL-ICC internal clock cable (purchased separately) from the CLOCK OUT header of the master card to the CLOCK

IN header of the slave. Use additional cables between subsequent slaves in a daisy chain fashion. In the Lynx Mixer

adapter page, set the sample clock source / reference to HEADER / WORD for each slave L22. Refer to the manual for a

detailed explanation of multi-card system configuration.

STEP 2: Insert Installation CD in CDROM Drive and Start Computer

The Installation CD contains all Windows and Macintosh files mentioned in the subsequent installation steps. As noted

earlier, the disk includes the complete L22 manual in addition to driver release notes and test files. If you do not have a

CDROM drive or need a more recent version, these files are available on our website at http://www.lynxstudio.com.

If you are installing the L22 in a Windows PC, skip the next step and go to STEP 4.

STEP 3: Macintosh Firmware Update (MAC ONLY)

For Macintosh compatibility, the firmware stored in the on-board flash memory must be updated prior to use. This is

required because the L22 ships from the factory with Windows firmware installed. To update the firmware:

1. Expand the file L2Update_OS9.sit (for OS9) or L2Update_OSX.sit (for OSX) using Aladdin Expander 5.0 or higher.

2. Run L2Update by double clicking on the L2Update program icon.

3. Select “Update” and wait for the program to complete.

4. Power off the computer for at least 10 seconds, then power the computer back on.

STEP 4: Install the L22 Device Driver and Mixer

Windows 2000 and Windows XP

1. At startup you will receive a “Found New Hardware” notification followed by a “Found New Hardware Wizard” window.

Press “Cancel” to continue.

2. From the system Start menu, select Run…, then type d:\SETUP.EXE into the Open window (where d: is the drive

letter of your CD-ROM) and click the OK button.

3. When the “LynxTWO Windows NT Driver Installation Wizard” appears click Continue.

4. When the “Installation Complete” message appears, read the instructions on the screen, then press “Close”.

NOTES: The Windows installation process installs both MME and ASIO compatible drivers in addition to the stand-alone

L22 Mixer application. These drivers provide compatibility with most popular third party applications. In ASIO compatible

applications, select “LynxTWO” in the device setup window to choose the ASIO driver.

Macintosh OS9

1. Expand the LynxTWO_OS9.sit driver installation package using Aladdin Expander 5.0 or higher.

2. Move the file LynxTWO in to the ASIO Drivers folder inside your audio application's folder. Do not rename the

LynxTWO file or the driver will not function properly.

3. Launch your audio application and select the “LynxTWO” driver in the device setup or configuration window.

NOTES: When the installation process is run under OS9, an ASIO compatible driver is installed. Sound Manager support

is not provided.

Macintosh OSX

1. Expand the LynxTWO_OSX.sit driver installation package using Aladdin Expander 5.0 or higher.

2. Double-click on the LynxTWO_OSX.pkg file. This will start the driver installation.

3. Follow the on-screen instructions. You must restart your computer for the driver installation to complete.

NOTES: The OSX installation process installs both the CoreAudio driver and the Lynx Mixer application.

1 2

Comments to this Manuals

No comments

Lynx Audio Cable User Manual Page 2

Comments to this Manuals